Images needing to be moved

[Schlibby]

Uh... I forgot to resize an image I uploaded. It's in the queue right now. Could you please reject it?
I'll upload the resized one later.

XBOX Game Pad(E-075-H-00130-A)
http://www.rfgeneration.c...fo.php?ID=E-075-H-00130-A

Can you prevent images that aren't 550px on one side being uploaded?

Whenever I try to upload an image that I've forgot to resize it just instantly rejects it 

[Shadow Kisuragi]

That's because it's too large. I think he's saying it's too small.

We prevent, I think, larger than 576 on the short side. We can certainly prevent smaller than 550px on the "short" side, though that basically removed the ability for people to upload camera pictures. We had something that would scale the images to 550px automatically, but the codec on it was terrible. Perhaps we should revisit that now...

[mumboking]

That's because it's too large. I think he's saying it's too small.

We prevent, I think, larger than 576 on the short side. We can certainly prevent smaller than 550px on the "short" side, though that basically removed the ability for people to upload camera pictures. We had something that would scale the images to 550px automatically, but the codec on it was terrible. Perhaps we should revisit that now...

The hardware shot I uploaded (and got approved) was 560px on the short side. I was tired and forgot to scale it down.

I go by the guide here:

All scans must be in the JPG format.  As a general rule, all scans should be 550 pixels on the SHORT SIDE.  Thus, the other dimension will be greater than 550 pixels.  Just set the short side (height of a Genesis cart, width of an NES box, height of a CD case, etc) to 550 pixels and let your photo editor adjust the other side to scale.

[Shadow Kisuragi]

Yep. PNG is allowed as well.

[mumboking]

These images need swapping around: http://www.rfgeneration.c...hot.pl?ID=E-182-H-00100-A

[Schlibby]

We've got some new UK Link to the Pasts in the database. Can the manual scan be moved from the Bandai release:

http://www.rfgeneration.c...nfo.pl?ID=E-044-S-00510-A

To the "THE games" release please:

http://www.rfgeneration.c...nfo.pl?ID=E-044-S-00510-C

The image should be deleted from the bandai release

[Shadow Kisuragi]

If something's moved, it deletes it in the old location. Should be resolved.

[Raidou]

Regarding LTTP -  all three versions (Bandai, Nintendo, THE) use the same SNSP-ZL-UKV cart as far as I can tell, so you can use the game image for all three.

[Raidou]

At the risk of being dogpiled by the North American NES collectors, I think there's an issue with Super Mario Bros. 3:

Super Mario Bros. 3 (USA, original release): http://www.rfgeneration.c...nfo.pl?ID=U-027-S-06330-A

The box images seem to be for the rerelease (NES-UM-USA-1) and not the original.  This can be identified by the positioning of the abbreviation, "Bros." in the title logo.  The original release has "Bros." positioned to the left hand side whereas the rerelease has it positioned to the right hand side next to the giant "3".  Trivia on the rerelease's entry suggests that there was only one US box for both versions, but eBay searches show that this is not the case:

• Mismatched manual, original box, original cart
• Mismatched manual, original box & cart
• VGA graded sealed

[techwizard]

http://www.rfgeneration.c...nfo.pl?ID=U-131-S-05211-A

the images for this, or at least the box back for sure, are the same as the "not for resale" variant, which already has box images.

[Bear78]

The front, back, and manual scans for U-076-S-03952-A are actually the Canadian version and should be moved to U-076-S-03954-A.  I have submitted the correct images for the USA version (U-076-S-03952-A).

Unfortunately, it appears one of our reviewers accepted the images without moving the originals. 

[Bear78]

I submitted some hardware images and it looks like the 1st image is set as the default image for the page.  Can these be moved around so the power adapter is not the default image?

http://www.rfgeneration.c...fo.php?ID=U-074-H-00020-B

http://www.rfgeneration.c...fo.php?ID=U-074-H-00021-B

http://rfgeneration.com/P...fo.php?ID=U-037-H-00024-A

[Shadow Kisuragi]

Fixed, but could you resubmit the power adapter for http://www.rfgeneration.c...fo.php?ID=U-074-H-00020-B ?
I tried moving the images around with our tools, and it failed and overwrote the image. I'll have to figure out what happened there, but I moved the rest by renaming the files.

[Bear78]

Fixed, but could you resubmit the power adapter for http://www.rfgeneration.c...fo.php?ID=U-074-H-00020-B ?
I tried moving the images around with our tools, and it failed and overwrote the image. I'll have to figure out what happened there, but I moved the rest by renaming the files.

Done

[Bear78]

Hardware shot #1 is broke for this entry: http://www.rfgeneration.c...fo.php?ID=U-027-H-00160-A
Not sure what happened to the source image. Loaded fine for me when I downloaded it. It wasn't a good quality photo anyways, so removed.

Also, the image for this entry: http://www.rfgeneration.c...fo.php?ID=U-031-H-00070-B
Should be moved to this entry: http://www.rfgeneration.c...fo.php?ID=U-031-H-00070-C  

Moved.