RF Generation.  The Classic and Modern Gaming Databases.RF Generation.  The Classic and Modern Gaming Databases.

New on the Blogs
Hot Community Blog Entries
Nielsen's Favorites on Channel 4
RF Generation Message Board Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 05:10:09 PM
Home Help Search Calendar Member Map Arcade Login Register
News: RF Generation: It's not the size of the collection, it's how you store it!

RF Generation Message Board | Announcements and Feedback | Announcements and Feedback | Power Supply Information in Database Question 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Power Supply Information in Database Question  (Read 4177 times)
Addicted
Blog Writer
***
Posts: 1966


 Stats
« on: January 23, 2015, 02:23:39 PM »

I would like to add in power supply information to the database.

Examples:

Power supply that came with the system.
Power supply that will work for the system.

I was thinking power supply that came with the system in additional hardware specs and trivia/additional information for the power supply that will work.

Any opinions?
Logged

Stephen Kick: “The thing about classic games was that they were the first for an entire generation. Successive works are going to be important to individuals and even to groups, but never to a whole generation in the same way.”
Izret101
Postmaster General; Wielder of the Mighty Banhammer
Director
*****
United States
Posts: 22654


WWW Stats

Champion of
   
« Reply #1 on: January 23, 2015, 02:27:51 PM »

Sounds good.

I think i ended up with a printer cable for my one of my Xboxes or DC i can't remember which...

Damn generic looking wires
Logged

Duke.Togo
Nintender Tape
Director
*****
United States
Posts: 6181


WWW Stats
« Reply #2 on: January 23, 2015, 02:58:49 PM »

Would it be easier to just list the power input requirements? For example, AC DC or both, barrel diameter, tip positive or negative, volts in, minimum amps in?
Logged

Addicted
Blog Writer
***
Posts: 1966


 Stats
« Reply #3 on: January 23, 2015, 03:09:01 PM »

@Duke: So something like this?

INPUT: 120V 60Hz 35W
OUTPUT: 9V - 1.2 Amp

Would you recommend also linking to the power supply that comes with the system in the rfgen database?
Logged

Stephen Kick: “The thing about classic games was that they were the first for an entire generation. Successive works are going to be important to individuals and even to groups, but never to a whole generation in the same way.”
Izret101
Postmaster General; Wielder of the Mighty Banhammer
Director
*****
United States
Posts: 22654


WWW Stats

Champion of
   
« Reply #4 on: January 23, 2015, 03:10:09 PM »

^I thought that is what you were aiming for...
Guess i was mistaken
Logged

Shadow Kisuragi
Variant Collector
Director
*****
United States
Posts: 10853
Awards: 2013 Fantasy Football Winner



 Stats
« Reply #5 on: January 23, 2015, 03:17:36 PM »

Any and all information that you can give that would be useful should go in... though, I doubt you'll find many power supplies in the database.
Logged

Addicted
Blog Writer
***
Posts: 1966


 Stats
« Reply #6 on: January 23, 2015, 03:21:16 PM »

Alright. I will put the list under additional hardware info similar to:

INPUT: 120V 60Hz 35W
OUTPUT: 9V - 1.2 Amp

I will leave out the power supply RF Gen database linking.
Logged

Stephen Kick: “The thing about classic games was that they were the first for an entire generation. Successive works are going to be important to individuals and even to groups, but never to a whole generation in the same way.”
Duke.Togo
Nintender Tape
Director
*****
United States
Posts: 6181


WWW Stats
« Reply #7 on: January 23, 2015, 03:52:07 PM »

I wouldn't bother with the input for the power supply on the console page, just the input required. Both could be listed on the power adapter page.

For US NES console:

INPUT: AC/DC, 9 volts, >=850mA, Barrel Size: Outer Diameter 5.5mm Inner Diameter 2.1mm

For Famicom console:

INPUT DC, 10 volts, >=850ma, Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm, Polarity: Center pin negative

Someone would need to double check my numbers, but that would provide a basis to find any compatible power supply.
Logged

Addicted
Blog Writer
***
Posts: 1966


 Stats
« Reply #8 on: January 29, 2015, 11:50:50 AM »

@Duke: Works for me

Famicom example:

Input: 10VDC 850mA

Polarity: Center Pin Negative
(+)------------(o------------(-)

Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm
Logged

Stephen Kick: “The thing about classic games was that they were the first for an entire generation. Successive works are going to be important to individuals and even to groups, but never to a whole generation in the same way.”
Duke.Togo
Nintender Tape
Director
*****
United States
Posts: 6181


WWW Stats
« Reply #9 on: February 04, 2015, 07:43:36 PM »

@Duke: Works for me

Famicom example:

Input: 10VDC 850mA

Polarity: Center Pin Negative
(+)------------(o------------(-)

Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm

That's perfect.
Logged

douglie007
Sega Dreamcast
***
United States
Posts: 1770


WWW Stats
Re:
« Reply #10 on: March 01, 2015, 05:04:49 PM »

That can go it trivia, and have the real power that comes out on a multimeter ei genesis 1 and 2 power cords give out about 12 to 14vs
Logged

Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder

RF Generation Theme derived from YabbGrey By Nesianstyles | Buttons by A.M.A
Valid XHTML 1.0! Valid CSS!
Page created in 0.144 seconds with 23 queries.
Site content Copyright © rfgeneration.com unless otherwise noted. Oh, and keep it on channel three.