X Box - RROD

[SideshowSam]

Sup RF!

I've been thinking of picking up an x box 360 just for kicks, as its one of the only consoles I don't have.  I'm trying to go cheap as possible (obviously) and I've been tossing around the idea of getting a CL junk box, with the red ring of death, and attempting to fix it.  I figure it could be fun anyway.

I've got a decent amount of experience with mechanical work, and I've fixed quite a few consoles, but never worked with an x box.  I've heard they can often be fixed fairly low cost, as its usually just a heat sink issue.  Does anyone have any experience with this, and in your opinion, would it be worth a shot if I could get one for >$50?

[Shadow Kisuragi]

You should be able to pick one up for $30-$35 without too much effort. They're fairly easy to fix, as you mentioned, as it's usually just replacing the X-clamps ($7 worth of parts) or reflowing the motherboard (heat gun and a couple hours). However, be aware that at this stage in the console's life that most people know how to fix them, and most of the ones being sold have likely had someone tinkering with them already.

IF you can get one with an intact warranty sticker, go for it - otherwise, avoid them. I think Tynstar has a few he could likely sell you.

[Antimind]

Yup, a stupid easy fix. It can be a bit of a pain getting the case apart. That's the hardest part of it all. IMO if you can't pick up a RRoD one for $25 or less just get a new one on sale.

[SirPsycho]

They're fairly easy to fix, as you mentioned, as it's usually just replacing the X-clamps ($7 worth of parts) or reflowing the motherboard (heat gun and a couple hours).

I always do both of these whenever I run into an RRoD anymore. Here's my advice, AVOID GAMESTOP REFURBS! I still have one album of pics out of many I've done, those bastards are terrible.

[kwvintgegmes]

somehow I came across 50 RROD xbox 360s and I dont know a thing about them.

I posted "one" for trade online, and someone gave me a ROB for one, but it would be sweet to get some of these up and running. Do any of you know of any "good" tutorials, and where I can buy materials?

[SirPsycho]

http://www.ifixit.com/Gui...g+of+Death+Fix+Kit/3550/1