Game Bit Bitterness

[Shepy]

So I've used some homemade game bits I modified from screwdriver bits for some time now but they just aren't cutting it. I need to get a well made set but am having troubles, seeing as reviews for all of them seem to be mixed. Anyone have any recommendations?

[NES_Rules]

Don't go with the absolute cheapest or most expensive, somewhere in the middle and you'll be safe in most cases. For as often as most people use them, even the cheaper ones will last for years.
I got mine off ebay FWIW.

[Duke.Togo]

I bought my game bit drivers from www.newelectronx.com years ago, and they are still in perfect shape. Well made.

[Shadow Kisuragi]

Harbor Freight has bits that work as game bits, and they typically hold up well.

[nupoile]

I know this isn't answering your question     but I made my own as well. I think the trick was using a good piece of steel rather than something soft that would change shape and get marred up with use.

[img width=700 height=525]http://farm8.staticflickr.com/7097/7317576362_0e1ba001d8_o.jpg[/img]


I do agree that having a nice set of tools would be better, but I like making my own when I can. It's not like it see's much use anyways. It's worked well so far.

[MaterialHandlerMike]

I have blue-handled, Silverhill Gamebit screwdrivers that seem pretty decent.

[Shepy]

Thanks for the suggestions... The problem with the ones I've made is that they tend to strip the plastic if slightly big or break if the right size...

[techwizard]

i bought a pack of 2 bits, each a different size (one mainly for carts, one mainly for systems) off ebay a few years back and haven't had any issues with them even after opening a lot of carts. i think they were around $8 for the pair before shipping.

[Zagnorch]

I picked up a Pro's Kit video game screwdriver set from the local Fry's Electronics for $30 a few months back.

http://www.frys.com/product/6174539

[img width=300 height=300]http://www.cyberguys.com/images/prod_images/p73118a.jpg[/img]

It's worked fairly well for me so far, although on some occasions a bit wasn't able to get to deeper-set screws on some of my consoles without having to buy extra accessories. Also, the included ratcheting screwdriver is a bit junky, but it's not like I can't get a suitable replacement for it should the need arise. Another downside is that the case doesn't hold the bits very securely; if you open the case up after dropping it, you'll likely have to reorganize everything.

On the upside, it includes three sizes of tri-wing bit, all the hex-ish security bits to open Nintendo and Sega consoles and carts, and even a few to open up Happy Meal toys so you can replace the batteries. And of course it has the usual array of slotted and Philips. And pasted on the inside of the lid is a quick-reference chart of the various bits and which consoles and/or games they can open up.

And... well, that's it, really. I know you're expecting me to end this with a dumb joke or smart-ass remark, but... sorry, fresh out right now. Maybe for my next post, okay?


'Late