|
Title: Power Supply Information in Database Question Post by: Addicted on January 23, 2015, 02:23:39 PM I would like to add in power supply information to the database.
Examples: Power supply that came with the system. Power supply that will work for the system. I was thinking power supply that came with the system in additional hardware specs and trivia/additional information for the power supply that will work. Any opinions? Title: Re: Power Supply Information in Database Question Post by: Izret101 on January 23, 2015, 02:27:51 PM Sounds good.
I think i ended up with a printer cable for my one of my Xboxes or DC i can't remember which... Damn generic looking wires Title: Re: Power Supply Information in Database Question Post by: Duke.Togo on January 23, 2015, 02:58:49 PM Would it be easier to just list the power input requirements? For example, AC DC or both, barrel diameter, tip positive or negative, volts in, minimum amps in?
Title: Re: Power Supply Information in Database Question Post by: Addicted on January 23, 2015, 03:09:01 PM @Duke: So something like this?
INPUT: 120V 60Hz 35W OUTPUT: 9V - 1.2 Amp Would you recommend also linking to the power supply that comes with the system in the rfgen database? Title: Re: Power Supply Information in Database Question Post by: Izret101 on January 23, 2015, 03:10:09 PM ^I thought that is what you were aiming for...
Guess i was mistaken Title: Re: Power Supply Information in Database Question Post by: Shadow Kisuragi on January 23, 2015, 03:17:36 PM Any and all information that you can give that would be useful should go in... though, I doubt you'll find many power supplies in the database.
Title: Re: Power Supply Information in Database Question Post by: Addicted on January 23, 2015, 03:21:16 PM Alright. I will put the list under additional hardware info similar to:
INPUT: 120V 60Hz 35W OUTPUT: 9V - 1.2 Amp I will leave out the power supply RF Gen database linking. Title: Re: Power Supply Information in Database Question Post by: Duke.Togo on January 23, 2015, 03:52:07 PM I wouldn't bother with the input for the power supply on the console page, just the input required. Both could be listed on the power adapter page.
For US NES console: INPUT: AC/DC, 9 volts, >=850mA, Barrel Size: Outer Diameter 5.5mm Inner Diameter 2.1mm For Famicom console: INPUT DC, 10 volts, >=850ma, Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm, Polarity: Center pin negative Someone would need to double check my numbers, but that would provide a basis to find any compatible power supply. Title: Re: Power Supply Information in Database Question Post by: Addicted on January 29, 2015, 11:50:50 AM @Duke: Works for me
Famicom example: Input: 10VDC 850mA Polarity: Center Pin Negative (+)------------(o------------(-) Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm Title: Re: Power Supply Information in Database Question Post by: Duke.Togo on February 04, 2015, 07:43:36 PM @Duke: Works for me Famicom example: Input: 10VDC 850mA Polarity: Center Pin Negative (+)------------(o------------(-) Barrel Size: Outer Diameter 5.5mm; Inner Diameter 2.1mm That's perfect. Title: Re: Post by: douglie007 on March 01, 2015, 05:04:49 PM That can go it trivia, and have the real power that comes out on a multimeter ei genesis 1 and 2 power cords give out about 12 to 14vs
|